Geoscan 401. Assembly and application

General information

_images/401.png

Geoscan 401 — multifunctional system, that included in basic kit multirotor unmanned aerial vehicle (UAV) and Geoscan Planner software.

Kit

  • Geoscan 401 unmanned aerial vehicle (UAV)

  • UAV’s transport container

  • Payload: *

    • customized Sony DSC-RX1RM2 camera;
    • gyro-stabilized optical-electronic system with FullHD videocamera;
    • Topcon B111 GNSS receiver (L1-L2, GPS/GLONASS/BeiDou);
    • quantum magnitometer Geoscan QM-Rb-1.
  • 37 V LiPo battery

  • Left rotation propeller — 2 PCs

  • Right rotation propeller — 2 PCs

  • Battery charger

  • Radio modem

  • Radio modem antenna

  • Radio modem pole

  • SDHC card 64 Gb — 2 PCs *

  • SD card 4 Gb — 2 PCs *

  • USB cable

  • UAV antenna

*Depends on equpment

Specifications

UAV type multirotor
Engine electric brushless — 4 PCs
Battery 37 V LiPo
Launch/Landing verticaly, in automatic mode, from/to 5 m area
Flight duration up to 1 h
Max wind speed 12 m/s
Speed of flight 0-50 km/h
Min safe flight altitude 25 m
Max flight altitude over start point 500 m
Max takeoff weight 9,3 kg
Max payload mass 2,5 kg
Preparation time before takeoff 5 min
UAV’s overall dimensions folded 70х25х20 cm
unfloded 150х150х43 cm
Photo shooting area in one flight 2 cm/pix quality 0,95 km²
3 cm/pix quality 1,4 km²
5 cm/pix quality | 2,1 km²
Operating temperature range: -20 to +40 °C
-40 to +20 °C (“Arctic” battery)

Maintenance

Visually inspect UAV for a damage after each flight.

In case, if a propellers are damaged, you can replace it by yourself using spare parts and tools from the kit.

If structural damage to the airframe or systems is detected, contact Geoscan support.

We recommended to send your UAV to the manufacturer for inspection and maintenance after 80 flights.

Storage

Geoscan 401 UAV (without battery) are recommended to be stored in a transport containers in dry rooms at a temperature of 5 to 25 °C and relative humidity not more than 80% without condensation. Service life — 2 years.

Batteries should be stored in a cool and dry place without direct sunlight, at a temperature of 5 to 25 °C and a relative humidity of 80% without condensation. The optimum voltage level when placing the battery to storage: 38,5 V.

Service Life — 1 year.